Fiber Optic Connectors / Contacts

ARINC 801 Terminus

The ARINC 801 fiber optic terminus is the next generation of high density, butt joint interconnect technology. With its standard 1.25 mm ferrule and sleeve, the ARINC 801 terminus is designed for both multimode and single-mode applications and is compatible with standard LC termination processes. The terminus is available both as a pull-proof design and as an optical disconnect style. Click Here for Qualification Test Report

ARINC 801 Terminus is available through our authorized distributors

Size 12 Expanded Beam Contacts

• Fits standard size 12 contact cavities for
• Multimode applications 50/125 and 62.5/125
• Insertion loss: 1.0 dB (Typical)
• Increased protection for fiber face
• Reduced influence from dirt debris and vibration
• Simple cleaning

Triax Connectors

NDL-Q (Quick Disconnect)

The series includes straight and right angle cable mount and PCB mount connectors, in-series and between series adapters, as well as coax/triax transitional adapters, bulkhead receptacles and cable-bus terminators. Cable mount connectors are designed for all types of data-bus and video interconnect systems including MIL-STD-1553B, ARINC 429, 100 Base-T Ethernet, high speed video hot-link and fibre channel data links.

These connectors are available through our authorized distributors

MIL-DTL-38999/MIL-DTL-83527/ARINC 404/ARINC 600/MIL-DTL-24308 Style Connectors

The triax contact series fit standard MIL-DTL-38999 size 8, 10 & 12 contact cavities, d-sub size 8, and ARINC size 1, 5, 8, 9 & 12 standard rack & panel connector cavities and MIL-DTL-83527 size 8 cavities. Sabritec offers Qualified Product List (QPL) triax contacts under specifications MIL-C-39029/90-529 and MIL-C-39029/91-530.

Coax Connectors / Contacts

MDHC (High Frequency Micro-D Coax Connectors)

High Frequency Micro-D Coax Connectors (MDHC) have a low VSWR up to 40 GHz (typ). These connectors have a constant 50 ohm airline impedance interface and are 30% smaller than our SCX coaxial connectors. Each coax contact has a maximum overall diameter of Ø.133" fitted into a low-profile metalized or plastic housing. MDHC coaxial contacts are a drop in replacement to Sabritec’s MDCX RF contacts with an increased.

Insert arrangements available in 2, 4, 6, 8 and 10 way coax assemblies with mixed signal and power contacts available in hybrid arrangements. frequency range from 10 GHz to 40 GHz. These connectors are RoHS compliant.

Click Here for Return Loss & Crosstalk Test Report

 

MDCX Multipin Coax Connectors

Multipin coax connectors with low VSWR of 1.25:1 up to 10 GHz (max mated pair). Each contact has a maximum diameter of 0.125" fitted into a low profile metalized housing. Insert arrangements available in 2, 4, 6, 8 and 10 way coax assemblies with mixed signal and power contacts available in hybrid arrangements. These connectors are RoHS compliant.

 

 

High Frequency Coax Contacts

Sabritec‘s High Frequency Coax Contacts are engineered with a “float mount” design to assure high performance (low VSWR) at microwave frequencies by preventing any air gap at the mating interface. These contacts are to be terminated to .086 diameter flexible cables.

• Size 8 and 12 cavities for MIL-DTL-38999, ARINC 404/600
• Fits Size 8 cavity for MIL-DTL-24308 D-Sub
• Spring loaded for optimum contact mating force
• High frequency performance
• Low VSWR • Size 8: 1.15:1 Typ Mated Pair
• Size 12: 1.25:1 Typ Mated Pair
• Insertion Loss:
• 0.15 dB to 26.5 GHz Typ (Size 8)
• 0.2 dB to 40 GHz Typ (Size 12)
• Socket contacts are spring loaded float mount
• Rugged interface works even if misaligned

Size 8 and 12 MIL-DTL-38999 contacts are available through our authorized distributors

Quadrax/Twinax Connectors

Miniature Size 10 Twinax/Quadrax Contacts for MIL-DTL-38999 and Rugged D-Sub Connectors

• Reduction in size of 30% from Size 8 and a 25% from Size 9 contact sizes.
• Allows for more signals per connector as well as more signal density per square inch of panel space
• Offered in 100 ohm Quadrax and/or 100/150 ohm differential pair Twinax
• These contacts are available in MIL-DTL-38999 and Rugged D-Sub formats.

Micro-D Twinax (MDTX)

Micro-D Twinax Connectors (MDTX) offer twinax blindmate assemblies fitted into a low-profile metalized Micro-D style shell. This series allows for modularity of PCB routing of high speed signaling capable of 100 Ohm differential pair matched impedance for IEEE 1394b firewire and gigabit Ethernet applications in a size 10 twinax contact. These connectors allow for maximum space utilization, ultra miniature size, high vibration capability and are extremely light weight and modular with true signal integrity. Insert arrangements are available in 2, 4, 6 and 8 way twinax assemblies with mixed signal and power contacts available in hybrid layouts. These connectors are available with locking post mechanisms or blind mate features

Duraspeed Quadrax/Twinax Contacts

Sabritec’s Duraspeed line offers true differential pair matched impedance Twinax and Quadrax contacts, where the differential pair and signal to shield impedance is maintained throughout the connector pair, with rugged low insertion force/high mating cycle precision contacts capable of withstanding a minimum of 6,000 mating cycles. All Duraspeed Quadrax (DSQ) and Twinax (DST) contacts are designed to fit Sabritec's standard cavities for all existing connector formats of high speed product lines of MIL-DTL-38999, ARINC 600 and Rugged-Subminiature.

 

Rugged D-Sub

These connectors provide low RF noise and high durability of up to 1,000 mating cycles. Sabritec connectors meet or exceed all requirements of MIL-STD-202 for shock and vibration. Offered with 100 ohm quadrax and/or differential pair twinax contacts. Consult factory when other impedances are required. The size 10 contacts are 30% smaller package size than standard size 9 for tight space constraints. These contacts offer the same performance in a much smaller package size.

These connectors are available through our authorized distributors

 

Hypergrip (HG Series) Connector Housing

Connector Features
• Push/pull latching design
• Sealing to IP67 – (temp. immersion) when mated, may be submerged for up to 1 min.
• Customer keyable – easily keyed in one of six different standard keying positions to prevent mismating, which could result in catastrophic consequences
• Aesthetic design – softly shaped and easy to clean
• Color coded – available in 5 colors to provide visual indication for efficient mating
• Integrated or overmoldable strain reliefs – prevents cable wire fatigue due to bending
• Front or rear panel mount receptacle design
• Fingerproof to IEC60601
• Cable to cable and cable to panel configurations.